Whether it's for low beam, high beams or turn signals, the bulb replacement is a very operation simple to perform . But if a fire does not work, you should not wait to repair it. Because some people ignore it, but it is condemnable by a sanction which can go up to 68 euros. Of course, it will first have to be changed for security reasons. This is therefore how to change the bulb of a headlight on a Nissan Silvia, point by point. Then we will see how to properly adjust them.
How to replace the bulb of a Nissan Silvia headlight
Now there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly neglected now, and more and more bulbs LED . These are much less energy intensive and more resistant. Whatever the type of bulb, the way to replace them will be identical. You will find below the logic to follow for change the bulb of your Nissan Silvia .
- Disconnect the battery in order to work more serenely.
- Free access to the rear portion of the fire. It will sometimes be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the defective bulb from the Nissan Silvia
- Compare it well with the new one to make sure it is suitable
- Place the new bulb gently, then fix it properly
- Replace the rubber cover then all the elements in reverse order
Once everything is in order, check that it works! The latter should have an intensity similar to the other. It is essential to have perfectly similar products.
How to properly adjust the headlights of a Nissan Silvia
After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and focused the same way. Among other things so as not to hinder motorists in the other direction. They should therefore be adjusted properly. To do this, simply position your vehicle facing a wall. First a meter from the wall, then a few meters. Then just adjust the fire with the new bulb in the same way as the other by comparing the halos. If neither of them goes, there are tutorials very well done on this subject.