Whether it's for low beam, high beams or turn signals, the bulb replacement is a super manipulation easy to execute . But in case a fire does not work, it should not be long to replace it. Because some people forget it, but it is reprehensible by a sanction which can go up to 68 euros. Obviously, you will have to change them first for safety reasons. So here is how to replace the headlight bulb on the Seat Fura, point by point. In a second step, we will see how to properly adjust them.change-bulb-headlight-Seat-Fura

How to change the bulb of a Seat Fura headlight

Now there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat neglected now, and more and more bulbs LED . They consume less energy and are more robust. Whatever the type of bulb, the way to change them will be similar. So that's the logic to follow for replace the bulb in your Seat Fura .

  • Disconnect the battery in order to work more comfortably.
  • Free access to the rear part of the light. It will sometimes be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the defective bulb from your Seat Fura
  • Compare it well with the new one to make sure it is suitable
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover then all the components following the reverse procedure

Now that everything is in place, test the bulb! The latter should have an intensity equal to the other. It is essential to have perfectly similar products.

How to set the headlights of a Seat Fura

After replacing a light, it remains plausible that it will be out of order. It is extremely important that two lights at the same height and focused the same way. Among other things so as not to annoy motorists in the other direction. That is why we must take the time to settle them properly. To do this, you must place your automobile facing a wall. To start one meter from the wall, then 5 or 6 meters. In a second step, it is enough to adjust the fire in question at the same height as the other according to the reflections on the wall. If the two are wrong, there are tutorials that can help.