Whether it's for low beam, high beams or turn signals, the changing a light bulb is an extremely manipulation easy to make . But in case a fire does not work, it should not be long to repair it. Because some people do not know it, but this is punishable by a fine of up to 68 euros. Of course, it is necessary to first replace them for safety reasons. Here is therefore how to replace the headlight bulb on your seat leon, point by point. Then we will find out how to properly adjust them.
How to replace the bulb in a seat leon headlight
Today, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly neglected now, and more and more bulbs LED . The latter are much less energy intensive and more robust. Regardless of the type of bulb, the way to replace them will be similar. So here is the procedure to follow for replace the bulb in your seat leon .
- Disconnect the battery to work more comfortably.
- Free access to the rear portion of the fire. It will be necessary to dismantle the battery from time to time, or covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the damaged bulb from your seat leon
- Compare it with the new one to be sure it matches
- Place the new bulb gently, then fix it properly
- Reclip the rubber cover then all the components following the reverse procedure
Once everything is in order, check that it works! This one should have the same intensity as the other. It is essential to have totally similar models.
How to set the headlights of a seat leon
After replacing a light, it is possible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to annoy the motorists opposite. It is therefore advisable to take the time to settle them properly. To do this, you just have to place your car facing a wall. First a short distance, then 5 or 6 meters. Then, you just have to adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If neither goes, there are tutorials that can help.