That it concerns low beam, high beams or turn signals, the bulb replacement is a very operation easy to perform . But when a fire stops working, it should not be long to repair it. Because many ignore it, but it remains reprehensible by a sanction which can go up to 68 euros. Of course, it will first have to be changed for security reasons. This is therefore how to change the bulb of a headlight on a seat terraavis, point by point. In a second step, we will find out how to set them correctly.change-bulb-headlight-seat-terraavis

How to replace the bulb in a seat terraavis headlight

Now there are several types of headlight bulbs. The most common are halogen , but we can also find Xenon , a little put on the side now, and more and more bulbs LED . They consume much less energy and are more enduring. No matter what kind of bulb, the way to replace them will be similar. You will find below the procedure to follow in order to change the bulb of your seat terraavis .

  • Disconnect the battery so that you can work more quietly.
  • Clear access to the rear portion of the light. Sometimes it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the damaged bulb from the seat terraavis
  • Compare it well with the news to make sure it matches
  • Place the new bulb gently, then fix it correctly
  • Replace the rubber cover and all the components in reverse order

Now that everything is in order, check that it works! The latter should have the same intensity as the other. It is important to have perfectly similar products.

How to set the headlights of a seat terraavis

After replacing a light, it is possible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to annoy the drivers you meet. So take the time to adjust them correctly. To do this, simply position your vehicle in front of a wall. To start one meter from the wall, then 5 or 6 meters. In a second step, you just have to adjust the fire with the new bulb in the same way as the other according to the reflections on the wall. If neither of them goes, there are tutorials very well done on this subject.