Whether it's for low beam, high beams or turn signals, the bulb replacement is a super operation easy to execute . But if a fire no longer works, we must not delay in fixing it. Because some people do not know it, but this is condemned by a fine of up to 68 euros. Of course, it is necessary to start repairing them for safety reasons. So here's how to change the headlight bulb on a smart fortwo, step by step. Second, we will find out how to properly adjust them.
How to replace the bulb on a smart fortwo headlight
Today, there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat neglected now, and more and more bulbs LED . The latter consume much less electricity and are more robust. Regardless of the type of bulb, the way to replace them will be similar. Here is the logic to follow in order to change the bulb of your smart fortwo .
- Disconnect the battery in order to work more quietly.
- Clear access to the rear part of the light. It will sometimes be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the defective bulb of your smart fortwo
- Compare it with the new one to be sure it is suitable
- Place the new bulb gently, then fix it properly
- Replace the rubber cover then all the elements in the other direction
Now that everything is in place, check that it works! The latter should display a similar intensity to the other. It is essential to have perfectly identical models.
How to set the headlights of a smart fortwo
After replacing a light, it is still possible that it will be out of order. It is very important that two lights at the same height and in the same axis. In particular so as not to disturb motorists in front. It is therefore advisable to take the time to adjust them properly. For that, you just have to place your automobile in front of a wall. To start a yard from the wall, then a few yards. Second, it is sufficient to adjust the fire in question to the same height as the other by comparing the halos. If both are incorrectly set, there are tutorials that can help you.