When the clock has no more light, it can be annoying. So you have to change the display bulb of this Toyota Auris. Even if the dashboard remains operational, we lack several information to circulate in good conditions. This action is not complex to perform, but requires a minimum of rigor. We advise you to take photos at certain stages to remind you of the opposite approach, especially for connectors. To perform this task, count approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's take a look at how to change this bulb, point by point.
How to change the bulb on the Toyota Auris display
Depending on the release dates, the method may vary a little. It is likely that some covers or screws are not identical. Here is therefore the procedure to be followed in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors that connect to the clock bulb of the Toyota Auris. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can access the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage also of course.
- Put in the new bulb making sure it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered specific problems.