That it concerns low beam, high beams or turn signals, the changing a light bulb is an extremely repair convenient to perform . But if a fire never goes out any more, we must not delay in changing it. Because some people do not know it, but this is condemnable by a ticket which can go up to 68 euros. Obviously, you are going to have to start repairing them for safety reasons. Here is therefore how to change the bulb of a headlight on the Toyota Auris, step by step. Second, we will find out how to properly fix them.change-headlight-bulb-Toyota-Auris

How to change the bulb of a Toyota Auris headlight

Today, there are a number of types of headlight bulbs. The most common are halogen , but we can also find Xenon , somewhat neglected now, and lots of bulbs LED . These are much less energy intensive and more robust. Regardless of the type of bulb, the way to change them will be similar. Here is the procedure to follow in order to change the bulb of your Toyota Auris .

  • Disconnect the battery so that you can work more comfortably.
  • Clear access to the rear portion of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fixing or unscrew the defective bulb from your Toyota Auris
  • Compare it with the news to make sure it matches
  • Position the new bulb gently, then fix it properly
  • Replace the rubber cover and then all of the components, following the reverse procedure

Now that everything is in place, check that it works! This one should display the same intensity as the other. It is essential to have perfectly similar models.

Configure the headlights of a Toyota Auris

Now that the fire is in place, it is possible that the latter is out of order. It is very important that two lights at the same height and in the same axis. In particular not to annoy the conductors opposite. That is why we must take the time to settle them properly. To do this, simply position your car facing a wall. First a short distance, then a few meters. Secondly, just adjust the light with the new bulb to the same height as the other by comparing the halos. If the two are wrong, there are tutorials that can help.