Whether it's for low beam, high beams or turn signals, the bulb replacement is a super repair convenient to do . But if ever a fire does not work, it should not be delayed to replace it. Because some people forget it, but this remains punishable by a sanction of up to 68 euros. Of course, you will have to replace them first for safety reasons. So here's how to replace the headlight bulb on a Toyota Prius +, step by step. Second, we will see how to properly adjust them.changing-headlight-bulb-Toyota-Prius +

How to change the bulb of a Toyota Prius + headlight

Today, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly neglected today, and more and more bulbs LED . These are much less energy-intensive and more robust. Regardless of the type of bulb, the way to change them will be similar. Here is the logic to follow in order to replace the bulb of your Toyota Prius + .

  • Disconnect the battery in order to work more serenely.
  • Free access to the rear portion of the fire. Sometimes it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Unclip or unscrew the defective bulb from your Toyota Prius +
  • Compare it with the new one to be sure it is suitable
  • Position the new bulb gently, then fix it correctly
  • Reclip the rubber cover and all the components in the other direction

Once everything is in place, check that it works! This one should have an equal intensity to the other. It is essential to have perfectly identical models.

How to configure the headlights of a Toyota Prius +

After replacing a light, it is possible that it will be out of order. It is extremely important that two lights at the same height and focused in the same way. Among other things so as not to annoy the drivers in front. You must therefore take the time to adjust them correctly. To do this, you just have to place your car facing a wall. At first one meter from the wall, then five or six meters. Second, it suffices to adjust the light with the new bulb in the same way as the other by comparing the halos. If both are incorrectly set, there are tutorials that can help you.