Whether it's about the low beams, high beams or turn signals, the bulb replacement is a super repair easy to do . But if a light no longer works, you should not delay changing it. Because many do not know it, but this is reprehensible by a sanction which can go up to 68 euros. Of course, we will first have to change them for security reasons. Here is therefore how to change the bulb of a headlight on a Nissan Laurel, step by step. Then we will see how to properly adjust them.
How to change the bulb of a Nissan Laurel headlight
Now there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side now, and a lot of bulbs LED . They consume much less electricity and are more enduring. Whatever the type of bulb, the way to change them will be identical. Here is the logic to follow in order to change the bulb of your Nissan Laurel .
- Disconnect the battery in order to work more quietly.
- Free access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover on the back of the fire
- Unclip or unscrew the damaged bulb of your Nissan Laurel
- Compare it well with the new one to make sure it is suitable
- Place the new bulb gently, then fix it properly
- Replace the rubber cover and all the components in reverse order
Now that everything is back in order, check that it works! The latter should display an intensity equal to the other. It is important to have perfectly identical products.
How to properly configure the headlights of a Nissan Laurel
After replacing a light, it is possible that it will be out of order. It is extremely important that two lights at the same height and focused the same way. Among other things so as not to annoy the motorists you meet. They should therefore be adjusted properly. To do this, you just have to place your car facing a wall. To start a short distance, then 5 or 6 meters. Then just set the fire in question in the same way as the other according to the reflections on the wall. If neither of them goes, there are tutorials that can help you.