Whether it's for low beam, high beams or turn signals, the changing a light bulb is a very repair simple to perform . But if a fire is no longer working, it should not be slow to change it. Because some people forget it, but this is condemned by a fine which can go up to 68 euros. Obviously, they must first be repaired for safety reasons. Here is how to replace the bulb of a headlight on your Smart Crossblade, point by point. In a second step, we will see how to correctly adjust them.change-headlight-bulb-Smart-Crossblade

How to change the bulb of a Smart Crossblade headlight

Now there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat neglected now, and lots of light bulbs LED . The latter consume less electricity and are more robust. Regardless of the type of bulb, the way to change them will be similar. Here is the logic to follow for replace the bulb of your Smart Crossblade .

  • Disconnect the battery to work more comfortably.
  • Clear access to the rear portion of the light. It will be necessary to dismantle the battery from time to time, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the defective bulb from the Smart Crossblade
  • Compare it with the new one to make sure it is suitable
  • Position the new bulb gently, then fix it correctly
  • Replace the rubber cover and all components in the opposite direction

Now that everything is in place, check that it works! This one should have the same intensity as the other. It is essential to have perfectly identical products.

How to set the headlights of a Smart Crossblade

Now that the fire is in place, it is possible that it has been disturbed. It is extremely important that two lights at the same height and in the same axis. Notably so as not to annoy the drivers in the other direction. You must therefore take the time to adjust them correctly. To do this, you just have to position your car facing a wall. First one meter from the wall, then five or six meters. Secondly, you just have to adjust the light with the new bulb in the same way as the other according to the reflections on the wall. If the two are set incorrectly, there are some really well-made tutorials out there.