Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a super manipulation easy to do . But if a fire no longer works, we should not wait to change it. Because some people do not know it, but it remains reprehensible by a sanction of up to 68 euros. Of course, it will be necessary above all to change them for safety reasons. Here is therefore how to replace the bulb of a headlight on the Smart Crosstown, step by step. Subsequently, we will see how to properly adjust them.
How to change the bulb on a Smart Crosstown lighthouse
Now there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , put on the side now, and more and more light bulbs LED . They consume less electricity and are more enduring. Regardless of the type of bulb, the way to change them will be the same. So this is the logic to follow in order to replace the bulb of your Smart Crosstown .
- Disconnect the battery so that you can work more comfortably.
- Clear access to the rear portion of the light. It will be necessary to dismantle the battery from time to time, or covers.
- Remove the rubber or plastic cover on the back of the fire
- Remove the fixing or unscrew the broken bulb from the Smart Crosstown
- Compare it with the news to make sure it is suitable
- Place the new bulb gently, then fix it properly
- Reclip the rubber cover and all components in reverse order
Now that everything is back to normal, test the bulb! The latter should have a similar intensity to the other. It is essential to have perfectly similar products.
How to adjust the headlights of a Smart Crosstown
After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and focused in the same way. Notably so as not to upset the drivers opposite. We must therefore take the time to adjust them properly. To do this, you just have to place your car facing a wall. To start a short distance, then a few yards. Subsequently, it suffices to adjust the light with the new bulb in the same way as the other according to the reflections on the wall. If the two are set incorrectly, there are some really well-made tutorials out there.