That it concerns low beam, high beams or turn signals, the changing a light bulb is a very manipulation simple to make . But in the event that a fire no longer works, it should not be long to change it. Because some people forget it, but this is condemnable by a sanction which can go up to 68 euros. Of course, they will first have to be replaced for safety reasons. Here is how to replace the headlight bulb on a Volkswagen 1302, point by point. Next, we will find out how to properly adjust them.
How to replace the bulb of a Volkswagen 1302 headlight
Nowadays, there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly neglected now, and more and more bulbs LED . The latter consume much less electricity and are more robust. Regardless of the type of bulb, the way to replace them will be the same. You will find below the procedure to follow in order to replace the bulb in your Volkswagen 1302 .
- Disconnect the battery so that you can work more comfortably.
- Free access to the rear portion of the fire. At times it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the defective bulb from the Volkswagen 1302
- Compare it with the new one to make sure it is suitable
- Position the new bulb gently, then fix it properly
- Reclip the rubber cover and all components in reverse order
Once everything is in place, check that it works! This one should have the same intensity as the other. It is important to have perfectly identical models.
How to properly configure the headlights of a Volkswagen 1302
Now that the fire is in place, it is plausible that the latter is out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to annoy motorists in the other direction. They should therefore be adjusted properly. To do this, simply place your car in front of a wall. First a short distance, then a few meters. Then just set the light in question to the same height as the other according to the reflections on the wall. If neither of them goes, there are tutorials that can help you.