Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely easy to perform . But if a fire no longer works, do not wait to replace it. Because many ignore it, but it is punishable by a fine of up to 68 euros. Of course, you will first have to change them for security reasons. Here is therefore how to replace the headlight bulb on the Volkswagen 411, point by point. Second, we will find out how to set them correctly.change-bulb-headlight-Volkswagen-411

How to replace the bulb of a Volkswagen 411 headlight

Today, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly put on the side now, and lots of bulbs LED . The latter consume less energy and are more robust. Regardless of the type of bulb, the way to replace them will be similar. Here is the procedure to follow for replace the bulb in your Volkswagen 411 .

  • Disconnect the battery in order to work more quietly.
  • Clear access to the rear portion of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fixing or unscrew the defective bulb from your Volkswagen 411
  • Compare it well with the new one to be certain that it is suitable
  • Put the new bulb down gently, then fix it correctly
  • Replace the rubber cover and then all of the components, following the reverse procedure.

Now that everything is in order, check that it works! The latter should have an intensity similar to the other. It is essential to have completely identical models.

Adjusting the headlights of a Volkswagen 411

After replacing a light, it is still possible that it will be out of order. It is very important that two lights at the same height and in the same axis. In particular not to upset the conductors opposite. It is therefore advisable to take the time to adjust them correctly. To do this, simply position your vehicle facing a wall. First a short distance, then 5 or 6 meters. Secondly, simply adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If the two are poorly tuned, there are very good tutorials on this.