Changing the light bulb in a seat terraavis is an extremely simple to execute . No need to be a great mechanic, this repair requires basic tools and no mechanical knowledge. To do this, plan about 10 minutes . However before embarking on repairs, it is necessary to make sure that the malfunction comes from the bulb. We will see first how to find out where the malfunction comes from, then how to replace the burnt out bulb.
The lighting of the ceiling light of your seat terraavis does not work anymore: the different origins.
The bulb is defective . This is of course the most common reason. Whatever happens, you will have to dismantle the seat terraavis light unit. To do this, it is necessary to follow the steps in the next section. To control it is extremely simple. When it is a filament bulb, you can visually check that the filament is broken. When, on the other hand, it is an LED bulb, it is necessary to check that the electricity is circulating properly thanks to a voltmeter. Remember to measure the voltage on both sides of the connector. An electrical malfunction . It's less ordinary, however it can still happen on a seat terraavis. It happens that there is a false contact, or that a connector is dirty. In this case, examine the voltage at the two poles. When the electricity does not pass properly, you will have to follow the electric wires until you see the cause of the failure. It also happens that the connectors are dirty. So, we will have to clean them with a specialized product and measure the tension.
How to replace the light bulb in your seat terraavis
Now that you have found the cause of the failure, you are sure that the malfunction comes from the bulb. We will see how to replace the ceiling light bulb step by step on a seat terraavis.
- Remove the ceiling lamp using a flat screwdriver. Pass it in the groove to make a lever.
- Remove the connector
- Disassemble the ceiling light to access the bulb
- Remove the bulb and compare it to the new one. Of course, the size and the base must be identical
- Attach the new bulb gently
- Reposition the connectors and the ceiling light in the opposite direction
You can now turn on the ignition and check that the bulb is working properly. It's good it's done ! The light bulb in your seat terraavis should work normally. Enjoy the road.