Changing the bulb of the ceiling light of a Seat Tribu is a super operation simple to execute . No need to be an excellent handyman, it requires basic tools and no knowledge of mechanics. To make this replacement, count ten minutes . However, before starting the repairs, you will have to make sure that the problem comes from the bulb. We will first find out how to know where the problem is coming from, and then how to replace the burnt out bulb.
The ceiling lighting of your Seat Tribu no longer works: the different origins.
The bulb is defective . This is naturally the most frequent reason. Whatever happens, you will have to disassemble the light unit from your Seat Tribu. To do this, you will have to follow the steps in the following paragraph. To check it is super simple. If it is ever a filament bulb, you can visually check that this filament is broken. If ever on the other hand it is an LED bulb, it will be necessary to check that the current flows correctly using a voltmeter. Remember to measure the voltage on both sides of the connector. An electrical concern . This is less common, however it can still happen on a Seat Tribu. There may be a short juice, or a connector is dirty. In this situation, examine the voltage at both poles. If the current does not flow correctly, you must follow the electrical wires until you can see the cause of the failure. It is also possible that the connectors are dirty. So, we will have to clean them with a specialized product and measure the voltage again.
How to replace the ceiling bulb of your Seat Tribu
Now that you have found the cause of the fault, you are sure the problem is with the bulb. We will see how to replace the ceiling light bulb point by point on a Seat Tribu.
- Remove the ceiling lamp using a flat screwdriver. Pass it in the groove to leverage.
- Remove the connector
- Disassemble the ceiling light so as to have access to the bulb
- Remove the bulb and compare it to the new one. Naturally, the size and the base must be identical
- Install the new bulb carefully
- Replace the connectors and the ceiling light in the other direction
You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The ceiling bulb of your Seat Tribu should work normally. Good walk.