Changing the headlight bulb of a Nissan Kubistar is a very manipulation simple to execute . You don't need to be an excellent mechanic, this repair requires few tools and no mechanical knowledge. To perform this operation, count ten minutes . However, before you start repairs, you will have to make sure that the problem must come from the bulb. We will first see how to know where the problem must come from, then how to replace the faulty bulb.change-bulb-ceiling-Nissan-Kubistar

The ceiling bulb of your Nissan Kubistar no longer works: the different origins.

The bulb is defective . This is obviously the most frequent reason. In any case, you will need to remove the light unit from the Nissan Kubistar. In order to do this, you will need to follow the steps in the next paragraph. To control it is very simple. If it is ever a filament bulb, you can visually check that this filament is broken. If, on the other hand, it is an LED bulb, it will be necessary to check that the electricity is circulating correctly using a voltmeter. Try to take the voltage on both sides of the connector. An electrical problem . It is less common, however it can still happen on this Nissan Kubistar. It happens that there is a short juice, or that a connector is dirty. In this situation, check the voltage at both poles. If the electricity does not pass correctly, it will be necessary to follow the electric wires until you can see the origin of the failure. It also happens that the connectors are dirty. So, we will have to clean them using a specialized product and re-measure the voltage.

How to replace the ceiling bulb of your Nissan Kubistar

Now that you have found the source of the fault, you are sure the problem must be with the bulb. We will see how to replace the ceiling light bulb step by step on this Nissan Kubistar.

  • Remove the ceiling light using a flat screwdriver. Pass it in the groove to make a lever.
  • Disconnect the connector
  • Dismount the ceiling light in order to have access to the bulb
  • Remove the bulb and compare it to the new one. Obviously, the size and the base must match
  • Place the new bulb carefully
  • Reposition the connectors and the dome following the reverse procedure

You can now switch on the ignition and check that the bulb is working properly. It's good, you're done! The interior light bulb of your Nissan Kubistar must work normally. Enjoy the road.