Changing the light bulb of a seat inca ceiling light is an extremely repair easy to make . No need to be a great mechanic, it requires few tools and no knowledge of mechanics. To carry out this replacement, plan ten minutes . However, before starting work, you must ensure that the malfunction comes from the bulb. We will see first how to find out where the malfunction comes from, then how to change the defective bulb.change-bulb-ceiling-light-seat-inca

The bulb of the ceiling light of your seat inca does not work anymore: the different causes.

The bulb is defective . This is naturally the most common cause. Whatever happens, you will have to remove the light unit from your seat inca. To do this, you will need to follow the steps in the next section. To control it is extremely easy. When it is a filament bulb, you can visually check that the filament is broken. When on the other hand it is an LED bulb, it will be necessary to check that the current circulates correctly by using a voltmeter. Remember to measure the voltage on both sides of the connector. An electrical malfunction . It is less frequent, however it can still happen on this seat inca. There may be a short juice, or a connector may be dirty. In this situation, inspect the tension at both ends. When the current does not flow correctly, you must follow the electric cables until you see the origin of the failure. The connectors may also be dirty. Then, it will be necessary to clean them using a specialized product and to measure the voltage.

How to replace the bulb in the ceiling light of your seat inca

Once you have found the cause of the failure, you are sure that the malfunction comes from the bulb. We will see how to change the bulb of the ceiling light step by step on this seat inca.

  • Remove the ceiling lamp with a flat screwdriver. Introduce it into the groove to make a lever.
  • Remove the connector
  • Disassemble the ceiling light so as to access the bulb
  • Remove the bulb and compare it to the new one. Naturally, the dimensions and the base must be identical
  • Attach the new bulb carefully
  • Replace the connectors and the ceiling light in reverse order

You can now turn on the ignition and check that the bulb is working properly. It's good it's done ! The bulb of the ceiling light of your seat inca should work normally. Good road.