When the clock stops working, it can get annoying. So you have to replace the display bulb of this Jeep Wagoneer. Even if the dashboard remains functional, certain indications are missing in order to drive in sufficient comfort. This action is not hard to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages in order to remember the reverse manipulation, especially for connectors. To carry out this manipulation, count approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to change this bulb, step by step.change-bulb-clock-Jeep-Wagoneer

How to change the bulb on the Jeep Wagoneer's display

Depending on the production dates, the method may vary a little. It is conceivable that some covers or screws are not identical. Here is the procedure to follow in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this case, keep them preciously aside.
  • Once the facade is completely removed, you need disconnect connectors that connect to your Jeep Wagoneer's clock bulb. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if it helps you.
  • You can normally access the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The tension also obviously.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave a comment if you have encountered any particular concerns.