When the clock stops working, it can be annoying. So you have to change the display bulb of this jeep wrangler. Even if the dashboard remains functional, it lacks some indications in order to circulate comfortably. This manipulation is not complex to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages in order to remind you of the reverse process, especially concerning the connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's take a look at how to change this bulb, point by point.change-bulb-clock-jeep-wrangler

How to change the jeep wrangler display bulb

Depending on the years of circulation, the method may vary slightly. It remains likely that some covers or screws are not identical. We therefore offer you the logic to follow in general.

  • Start with remove the covers front panel that prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove some screws. In this case, keep them carefully aside.
  • Once the facade is completely dismantled, disconnect connectors connected to the clock bulb of this jeep wrangler. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if that can be helpful.
  • Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The voltage also of course.
  • Place the new bulb by checking that it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

You can leave a comment if you have encountered any particular concerns.