When the clock stops working, it can be unpleasant. So you have to change the display bulb of the Kia Carens 2. Although the dashboard remains operational, some indications are missing in order to drive comfortably. This manipulation is not hard to perform, but requires a minimum of thoroughness. We advise you to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this operation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to replace this bulb step by step.change-bulb-clock-Kia-Carens-2

How to change the bulb on the Kia Carens 2 display

Depending on the release dates, the procedure may vary slightly. Some covers or screws may not be the same. So here is the logic to follow in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this case, keep them preciously aside.
  • Once the facade has been completely removed, it will disconnect connectors connected to the clock bulb of your Kia Carens 2. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally have access to the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also of course.
  • Put in the new bulb making sure it sits well at the bottom of its socket.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave a comment if you have encountered particular problems.