When the clock stops working, it can be unpleasant. So you have to change the display bulb of this Nissan Interstar Combi. Even if the dashboard remains functional, it lacks certain indications to circulate in good conditions. This operation is not difficult to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages to remind you of the reverse manipulation, especially regarding connectors. To perform this task, allow about a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to replace this bulb step by step.
How to change the bulb on the Nissan Interstar Combi display
Depending on the years of production, the methodology may vary a little. Some covers or screws may not be the same. Here is therefore the procedure to follow in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors that connect to the clock bulb of your Nissan Interstar Combi. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally have access to the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. This must be identical in terms of base and volume. The tension as well obviously.
- Place the new bulb making sure it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered specific malfunctions.