When the clock stops lighting up, it can be annoying. We will therefore have to replace the display bulb of this Nissan Interstar Minibus. Although the dashboard remains functional, we are missing some information to drive in sufficient comfort. This operation is not difficult to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages to remind yourself of the reverse process, especially concerning the connectors. To carry out this manipulation, count about a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's see how to change this bulb, point by point.change-bulb-clock-Nissan-Interstar-Minibus

How to change the display bulb of the Nissan Interstar Minibus

Depending on the year of release, the procedure may vary a little. It remains likely that some covers or screws differ. We therefore suggest the procedure to follow in general.

  • Start by remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove a few screws. In this case, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors that connect to the clock bulb of your Nissan Interstar Minibus. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
  • You can normally have access to the damaged bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also of course.
  • Place the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

We invite you to leave us a comment if you have encountered specific problems.