When the clock stops working, it can be annoying. So you have to change the display bulb of this Nissan Juke. Although the dashboard remains functional, we lack several information to circulate in good conditions. This manipulation is not hard to execute, but requires a minimum of meticulousness. We advise you to take photos at certain stages to remind you of the reverse manipulation, especially concerning connectors. To do this, count roughly a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Nissan-Juke

How to change the bulb on the Nissan Juke display

Depending on the years of production, the procedure may vary a little. It is possible that several covers or screws are not identical. This is the general approach to follow.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this case, keep them preciously aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of the Nissan Juke. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can have access to the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage also obviously.
  • Put in the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered specific concerns.