When the clock stops working, it can be annoying. It will therefore be necessary to replace the display bulb of the Nissan King Cab. Although the dashboard remains operational, it lacks several pieces of information to circulate comfortably. This action is not hard to perform, but requires a minimum of rigor. It is also advisable to take photos at different stages to remember the reverse manipulation, especially for the connectors. To execute this manipulation, count approximately a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's see how to replace this bulb, step by step.
How to change the bulb on the Nissan King Cab display
Depending on the release dates, the methodology may vary slightly. It remains possible that some covers or screws are not identical. Here is the procedure to follow in general.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. Therefore, keep them carefully aside.
- Once the facade is completely removed, you need disconnect connectors connected to the clock bulb of your Nissan King Cab. This will allow you to remove all of the connectors from the block, as long as you remember the location. Help yourself with your camera if needed.
- You can normally access the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The tension also of course.
- Place the new bulb making sure it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave a comment if you have encountered any particular concerns.