When the clock runs out of light, it can be annoying. So you have to change the display bulb of the Nissan Laurel. Although the dashboard remains functional, we are missing several pieces of information in order to drive in sufficient comfort. This operation is not hard to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages in order to remember the reverse process, especially for the connectors. To complete this task, plan approximately a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's take a look at how to replace this bulb, step by step.
How to change the display bulb of the Nissan Laurel
Depending on the release dates, the methodology may vary a little. Some covers or screws may not be the same. This is the general approach to follow.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of your Nissan Laurel. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if necessary.
- Normally you can access the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension also of course.
- Put in the new bulb making sure it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered particular malfunctions.