When the clock stops lighting up, it can be annoying. So you have to replace the display bulb of this Nissan Maxima 2. Although the dashboard is still operational, it lacks some indications to drive in sufficient comfort. This operation is not difficult to achieve, but requires a minimum of rigor. We advise you to take pictures at certain stages to remind you of the reverse process, especially for the connectors. To complete this task, allow about a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.
How to change the display bulb of the Nissan Maxima 2
Depending on the year of release, the methodology may vary slightly. It is possible that some covers or screws are not identical. Here is the process to follow in general.
- Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
- Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of the Nissan Maxima 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also obviously.
- Place the new bulb by checking that it is at the bottom of its location.
- Put the connectors in place.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered specific concerns.