When the clock stops working, it can be annoying. So we will have to change the display bulb of the Nissan Maxima 4. Even if the dashboard is still operational, we are missing several pieces of information in order to drive comfortably. This action is not hard to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages in order to remind you of the reverse manipulation, especially for the connectors. To complete this task, plan roughly a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to change this bulb, step by step.
How to change the display bulb of the Nissan Maxima 4
Depending on the years of production, the methodology may vary slightly. It is conceivable that some covers or screws differ. This is therefore the logic to be followed in general.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this situation, keep them carefully aside.
- Once the cover is completely removed, you need disconnect connectors connected to the clock bulb of the Nissan Maxima 4. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also naturally.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave us a comment if you have encountered particular concerns.