When the clock runs out of light, it can get unpleasant. So you have to replace the display bulb of the Seat Arosa. Although the dashboard remains functional, we are missing several pieces of information in order to drive in good conditions. This operation is not complex to perform, but requires a minimum of rigor. We advise you to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To perform this task, allow about a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Seat-Arosa

How to change the bulb on the Seat Arosa display

Depending on the release dates, the procedure may vary a little. It is likely that some covers or screws differ. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them preciously aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of the Seat Arosa. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally access the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. This must be identical in terms of base and volume. The tension as well obviously.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

We invite you to leave us a comment if you have encountered specific problems.