When the clock stops lighting up, it can be annoying. So you have to replace the display bulb from the seat terraavis. Even if the dashboard remains functional, we are missing some indications in order to circulate comfortably. This manipulation is not hard to perform, but requires a minimum of thoroughness. It is also advisable to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To perform this operation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to replace this bulb, point by point.change-bulb-clock-seat-terraavis

How to change the bulb of the seat terraavis display

Depending on the release year, the procedure may vary a little. It remains likely that some covers or screws differ. We therefore propose the logic to be followed in general.

  • Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them preciously aside.
  • Once the facade is completely dismantled, disconnect connectors connected to the clock bulb of your seat terraavis. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • You can normally access the defective bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension as well obviously.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave a comment if you have encountered particular malfunctions.