When the clock stops working, it can get annoying. So we will have to change the display bulb of the smart forfour. Although the dashboard remains operational, we are missing some indications to drive in good conditions. This manipulation is not complex to execute, but requires a minimum of rigor. We also advise you to take photos at certain stages to remember the reverse manipulation, especially regarding connectors. To carry out this task, plan around a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.
How to change the bulb on the smart forfour display
Depending on the years of production, the method may vary a little. It remains likely that some covers or screws are not identical. Here is therefore the logic to be followed in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of the smart forfour. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can have access to the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension as well obviously.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
Do not hesitate to leave us a comment if you have encountered particular problems.