When the clock stops lighting up, it can get unpleasant. So you have to replace the display bulb of the Toyota Fchv-4. Although the dashboard is still functional, some information is missing to drive in sufficient comfort. This manipulation is not complex to execute, but requires a minimum of rigor. We also advise you to take photos at certain stages to remind you of the reverse approach, especially for connectors. To carry out this manipulation, count approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb, step by step.change-bulb-clock-Toyota-Fchv-4

How to change the light bulb on the Toyota Fchv-4 display

Depending on the production dates, the method may vary slightly. It is likely that some covers or screws differ. We therefore propose the logic to be followed in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of the Toyota Fchv-4. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension also obviously.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

We invite you to leave us a comment if you have encountered particular problems.