When the clock doesn't light up any more, it can be annoying. So you have to change the display bulb of the Toyota Prius 2. Even if the dashboard remains functional, it lacks certain indications in order to circulate in good conditions. This manipulation is not difficult to perform, but requires a minimum of rigor. We advise you to take pictures at certain stages in order to remind you of the reverse manipulation, in particular concerning the connectors. To perform this manipulation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to replace this bulb, point by point.
How to change the display bulb of the Toyota Prius 2
Depending on the release dates, the procedure may vary slightly. It is conceivable that some covers or screws differ. We therefore propose the logic to be followed in general.
- Start by remove the covers of the front panel which impede access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. Therefore, keep them carefully aside.
- Once the facade is completely dismantled, you must disconnect connectors which connect to the clock bulb of the Toyota Prius 2. You can therefore remove all of the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
- You can normally access the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage also of course.
- Put in the new bulb making sure it is at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave a comment if you have encountered specific problems.