When the clock stops lighting up, it can be unpleasant. So we will have to change the display bulb of the Toyota Prius +. Although the dashboard remains operational, several pieces of information are missing in order to drive in good conditions. This operation is not difficult to achieve, but requires a minimum of rigor. We advise you to take pictures at certain stages in order to remember the reverse manipulation, especially concerning the connectors. To perform this operation, count approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to change this bulb, step by step.change-bulb-clock-Toyota-Prius +

How to change the display bulb of the Toyota Prius +

Depending on the release dates, the procedure may vary a little. It is conceivable that some covers or screws differ. This is the general process to follow.

  • Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors that connect to the clock bulb of your Toyota Prius +. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if necessary.
  • Normally you can access the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The tension also obviously.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

You can leave us a comment if you have encountered specific problems.