When the clock stops working, it can be annoying. So you have to replace the display bulb of the Volkswagen 1200. Although the dashboard is still operational, we lack some information to drive in sufficient comfort. This manipulation is not difficult to perform, but requires a minimum of rigor. It is indeed advisable to take pictures at certain stages to remind yourself of the reverse manipulation, especially concerning the connectors. To perform this operation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Volkswagen 1200 display
Depending on the production dates, the method may vary a little. It is likely that some covers or screws are not identical. This is therefore the logic to be followed in general.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. Therefore, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of this Volkswagen 1200. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- You can normally access the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also of course.
- Place the new bulb making sure it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered particular malfunctions.