When the clock runs out of light, it can be unpleasant. So you have to change the display bulb Volkswagen 1303. Although the dashboard remains operational, we lack some indications to circulate in good conditions. This manipulation is not complex to perform, but requires a minimum of rigor. We advise you to take pictures at different stages to remind you of the reverse manipulation, especially for the connectors. To complete this task, allow about a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb step by step.
How to change the bulb on the Volkswagen 1303 display
Depending on the year of release, the method may vary slightly. Several covers or screws may not be the same. Here is therefore the logic to follow in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of the Volkswagen 1303. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- Normally you can access the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension too of course.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered specific malfunctions.