When the clock has no more light, it can be annoying. So you have to replace the display bulb of the Volkswagen 1500. Although the dashboard remains operational, we lack certain information in order to circulate comfortably. This action is not hard to execute, but requires a minimum of rigor. It is also advisable to take photos at different stages in order to remind you of the opposite approach, especially concerning connectors. To carry out this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Volkswagen 1500 display
Depending on the years of circulation, the method may vary a little. Several covers or screws may not be identical. We therefore suggest the logic to be followed in general.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them preciously aside.
- Once the facade is completely dismantled, you must disconnect connectors which connect to the clock bulb of your Volkswagen 1500. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
- Normally you can access the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also naturally.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered particular problems.