When the clock stops lighting up, it can be annoying. So we will have to change the display bulb of this Volkswagen 1600. Although the dashboard is still operational, we are missing several pieces of information in order to drive in good conditions. This action is not difficult to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages in order to remember the reverse process, especially regarding connectors. To perform this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb, point by point.
How to change the bulb on the Volkswagen 1600 display
Depending on the production dates, the procedure may vary slightly. It remains possible that some covers or screws are not identical. This is the logic to follow in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of the Volkswagen 1600. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The tension also of course.
- Place the new bulb by checking that it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered specific problems.