When the clock stops working, it can be annoying. So you have to replace the display bulb of this Volkswagen 411. Even if the dashboard remains operational, we are missing several information in order to circulate comfortably. This manipulation is not hard to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages in order to remember the reverse process, in particular concerning the connectors. To carry out this operation, count about a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to replace this bulb step by step.
How to change the bulb on the Volkswagen 411 display
Depending on the years of circulation, the methodology may vary slightly. It is likely that some covers or screws are not identical. We therefore offer you the logic to follow in general.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may have to remove several screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of the Volkswagen 411. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- You can normally have access to the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension as well obviously.
- Place the new bulb making sure it sits well at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered particular malfunctions.