When the clock stops working, it can get annoying. So we will have to change the display bulb of the Volkswagen Amarok. Even if the dashboard is still functional, we are missing several indications in order to drive comfortably. This operation is not hard to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages to remind you of the reverse manipulation, especially for connectors. To execute this operation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, point by point.
How to change the bulb on the Volkswagen Amarok display
Depending on the release years, the methodology may vary slightly. It remains likely that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of the Volkswagen Amarok. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also obviously.
- Place the new bulb making sure it sits well at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave us a comment if you have encountered any particular problems.