When the clock runs out of light, it can get unpleasant. So you have to replace the display bulb of this Volkswagen Arteon. Even if the dashboard remains functional, it lacks some indications to drive in good conditions. This action is not complex to execute, but requires a minimum of thoroughness. It is also advisable to take photos at different stages to remember the reverse process, especially regarding connectors. To perform this task, count approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's take a look at how to replace this bulb step by step.
How to change the bulb on the Volkswagen Arteon display
Depending on the release dates, the procedure may vary slightly. It remains possible that several covers or screws are not identical. So that's the logic to follow in general.
- Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove some screws. In this case, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Volkswagen Arteon. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally access the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also naturally.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific concerns.