When the clock stops working, it can get unpleasant. So you have to change the display bulb of this Volkswagen Bora. Even if the dashboard remains operational, we are missing some information in order to drive comfortably. This action is not difficult to perform, but requires a minimum of thoroughness. It is also advisable to take photos at certain stages to remind you of the reverse manipulation, especially for connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, point by point.change-bulb-clock-Volkswagen-Bora

How to change the bulb on the Volkswagen Bora display

Depending on the production dates, the procedure may vary a little. It is likely that some covers or screws differ. This is the general approach to follow.

  • Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
  • Once the facade is completely dismantled, you must disconnect connectors connected to the clock bulb of the Volkswagen Bora. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • Normally you can access the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The voltage also naturally.
  • Put in the new bulb by checking that it is located at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered particular malfunctions.