When the clock stops working, it can be unpleasant. It will therefore have to change the display bulb from the seat inca. Even if the dashboard is still functional, it lacks some information to circulate comfortably. This manipulation is not complex to execute, but requires a minimum of rigor. We advise you to take photos at certain stages to remind you of the reverse process, especially regarding connectors. To carry out this task, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to replace this bulb, point by point.change-bulb-clock-seat-inca

How to change the bulb of the seat inca display

Depending on the release dates, the method may vary slightly. It remains likely that several covers or screws are not identical. So that's the general approach to follow.

  • Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of your seat inca. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The tension also of course.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

We invite you to leave a comment if you have encountered particular malfunctions.