When the clock stops lighting up, it can be annoying. So you have to replace the display bulb of the Opel Mokka X. Although the dashboard remains functional, it lacks a few indications to drive in good conditions. This operation is not complex to perform, but requires a minimum of thoroughness. We advise you to take photos at certain stages to remind you of the reverse manipulation, especially regarding connectors. To do this, count about a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, step by step.
How to change the bulb on the display of the Opel Mokka X
Depending on the year of discharge, the procedure may vary slightly. It is conceivable that some covers or screws differ. So here is the logic to follow in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them preciously aside.
- Once the facade is completely removed, you need disconnect connectors connected to the clock bulb of the Opel Mokka X. You will be able to dismantle all the connectors on the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally have access to the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also naturally.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered particular concerns.