When the clock stops lighting up, it can be annoying. So we will have to change the display bulb of the Opel Mokka. Although the dashboard is still functional, we are missing several indications in order to circulate in good conditions. This manipulation is not complex to execute, but requires a minimum of rigor. We also advise you to take photos at certain stages in order to remember the reverse manipulation, especially for connectors. To carry out this operation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, point by point.
How to change the bulb on the display of the Opel Mokka
Depending on the production dates, the procedure may vary slightly. Some covers or screws may not be the same. This is therefore the logic to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Opel Mokka. You can therefore dismantle all of the block's connectors, provided that you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally access the broken bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the previous one. This must be identical in terms of base and volume. The tension also obviously.
- Place the new bulb by checking that it is at the bottom of its location.
- Put the connectors in place.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered particular problems.