When the clock has no more light, it can be annoying. So you have to change the display bulb of this Opel Movano. Although the dashboard remains functional, it lacks a few indications to circulate comfortably. This manipulation is not complex to perform, but requires a minimum of thoroughness. We advise you to take photos at certain stages to remember the reverse manipulation, especially concerning the connectors. To perform this task, count approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's look at how to replace this bulb, point by point.
How to change the bulb on the display of the Opel Movano
Depending on the production dates, the methodology may vary slightly. It is still possible that some covers or screws differ. Here is therefore the logic to be followed in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to take off some screws. In this situation, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of this Opel Movano. You will be able to remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage also obviously.
- Put in the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered specific problems.