When the clock runs out of light, it can be annoying. So you have to change the display bulb of this Opel Olympia. Even if the dashboard is still operational, several indications are missing in order to drive comfortably. This action is not complex to execute, but requires a minimum of rigor. We advise you to take photos at certain stages in order to remember the reverse process, especially for connectors. To complete this task, count about a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to replace this bulb, step by step.
How to change the bulb on the display of the Opel Olympia
Depending on the years of circulation, the procedure may vary a little. It remains likely that several covers or screws are not identical. This is the general approach to follow.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this case, keep them carefully aside.
- Once the facade is completely removed, you must disconnect connectors which connect to the clock bulb of your Opel Olympia. This will allow you to dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension also naturally.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
You can leave us a comment if you have encountered specific malfunctions.