When the clock stops working, it can get annoying. So you have to replace the display bulb of the Seat Ibe. Although the dashboard remains functional, it lacks some information to circulate comfortably. This action is not hard to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at different stages to remind you of the reverse approach, especially for connectors. To perform this task, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Seat-Ibe

How to change the bulb on the Seat Ibe display

Depending on the release dates, the methodology may vary a little. Some covers or screws may differ. We therefore suggest the procedure to be followed in general.

  • Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. Sometimes you have to remove a few screws. In this situation, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of your Seat Ibe. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
  • Normally you can have access to the damaged bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The tension also obviously.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered specific problems.