When the clock has no more light, it can be annoying. So you have to change the display bulb of the smart fortwo. Even if the dashboard is still functional, some indications are missing in order to circulate in sufficient comfort. This operation is not hard to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages in order to remember the reverse process, especially for connectors. To carry out this operation, plan about a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-smart-fortwo

How to change the bulb on the smart fortwo display

Depending on the release dates, the procedure may vary slightly. It remains possible that several covers or screws are not identical. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors that connect to the clock bulb of this smart fortwo. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage also naturally.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

We invite you to leave a comment if you have encountered specific malfunctions.