Whether it's about the low beams, high beams or turn signals, the changing a light bulb is an extremely repair convenient to execute . But if a fire does not work, you should not wait to replace it. Because some people forget it, but it remains reprehensible by a fine of up to 68 euros. Of course, they will first have to be changed for safety reasons. So here is how to change the headlight bulb on a Nissan King Cab, step by step. In a second step, we will see how to properly adjust them.change-headlight-bulb-Nissan-King-Cab

How to replace the bulb of a Nissan King Cab headlight

Today there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , a little put on the side now, and a lot of bulbs LED . The latter are much less greedy in electricity and more resistant. No matter what kind of bulb, the way to replace them will be similar. Here is the procedure to follow for change the bulb of your Nissan King Cab .

  • Disconnect the battery to work more comfortably.
  • Free access to the rear part of the light. From time to time it will be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the defective bulb from the Nissan King Cab
  • Compare it with the new one to make sure it matches
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover then all the elements following the reverse procedure

Now that everything is in order, test the bulb! This should display an intensity equal to the other. It is essential to have perfectly identical products.

How to set the headlights of a Nissan King Cab

Now that the fire is in place, it is plausible that it is out of order. It is very important that two lights at the same height and in the same axis. In particular not to annoy the motorists opposite. So take the time to settle them properly. To do this, simply place your vehicle in front of a wall. First a short distance, then 5 or 6 meters. In a second step, you just have to adjust the light in question at the same height as the other by comparing the halos. If neither of them goes, there are tutorials that can help you.