The advantage of an electric window regulator is undeniable in comparison with manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to determine precisely the nature of the failure. With this article we will see how to replace the electric window regulator of a Jeep Wagoneer . But before you start, you need to be sure you understand where the malfunction is coming from. Let's be clear, it is sometimes unnecessary to change the entire window regulator, a simple small repair will often work. Whether it's a false contact, or simply a lack of oiling. Now that you've identified the nature of the problem, let's get back to our topic.change-window-regulator-Jeep-Wagoneer

How to replace a Jeep Wagoneer window regulator

Changing a window regulator is relatively tedious. Depending on your expertise on the subject, count approximately three hours to make sure you have the time you need. Whether for a Jeep Wagoneer or another car, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take photos at different times to help you install the new window regulator.

Removing a window regulator on a Jeep Wagoneer

  • Remove the entire door trim. From the handle to the mirror cover. This should be done relatively gently with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This step is quite long to perform.
  • Remove the window regulator seals from your Jeep Wagoneer. Again, it's wiser to do it delicately.
  • Now that you have access to the window regulator, disconnect the connectors. You must then remove the motor from the window regulator in case it is stuck.
  • Release all the fasteners that hold the window, then release the window. It is sometimes better to position the window halfway up to be able to carry out this operation. Obviously, extreme care must be taken when moving the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is wiser to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is at times held by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Jeep Wagoneer

  • Introduce the new window regulator. Make sure that its position is identical to the damaged window regulator. You will probably need to use the fasteners that you removed.
  • Replace the glass as you removed it. At times it will be necessary to rotate it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Reassemble the door trim assembly.

It's good, you now have a new and functional window regulator . So you have to put the ignition on and test it.